Ajustement des lunettes
How to adjust and set your acetate and titanium eyeglass frames?
To ensure optimal comfort and perfect vision, it is important that your glasses fit properly. Here is a step-by-step guide on how to adjust and fit your acetate and titanium eyeglass frames.
- Branch Adjustment
Acetate frames :
- Step 1: Heat the branches. Use a hair dryer or a hot water bath to gently heat the branches. Do not expose them to a direct flame.
- Step 2: Bend the branches. Once the branches are sufficiently heated, gently bend them inward or outward as needed. Be sure to do this gradually to avoid breaking the material.
- Step 3: Check the fit. Place the glasses on your face to check if the temples are properly adjusted. Repeat the steps if necessary.
Titanium Frames :
- Step 1: Use specialized pliers. Titanium is a very strong material, and it is recommended to use special pliers to adjust the branches.
- Step 2: Bend gently. Using pliers, bend the branches using light pressure. Do this gently to avoid deforming the material.
- Step 3: Check the fit. Place the goggles on your face to check for comfort. Repeat if necessary.
- Bridge Adjustment
Acetate frames:
- Step 1: Heat the bridge. Use a hair dryer or hot water to heat the bridge of the glasses.
- Step 2: Adjust the shape. Once heated, gently adjust the shape of the bridge by widening or narrowing it as needed.
- Step 3: Check the fit. Try on the glasses to check if the bridge fits comfortably on your nose. Repeat the steps if necessary.
Titanium Frames:
- Step 1: Use pliers. Use specialized pliers to adjust the bridge of titanium frames.
- Step 2: Apply light pressure. Using the pliers, apply light pressure to widen or narrow the bridge.
- Step 3: Check the fit. Try on the glasses to check the comfort of the bridge. Repeat if necessary.
- General Advice
- Be patient: Adjusting your glasses can take time. Go slowly to avoid damaging the frames.
If you are unsure about how to adjust your glasses, it is best to consult a professional optician.
- Use the right tools: For titanium frames, the use of specialized pliers is highly recommended.
With these instructions, you should be able to adjust and set your acetate and titanium eyeglass frames for optimal comfort.